language_english langeuage_taiwan language_china
wadatec bar_1 bar_2 bar_3 bar_4 bar_5
  • Sheet
  • Plate
  • Rod
  • Wire
  • Filament
  • Alloy

Tungsten Sheet

Appearance : It has metallic silver luster.
Density:min :19.15g /㎤
Thickness :0.2㎜ - 2.0㎜. 
Surface Condition :Material may be supplied with as-rolled, as-cleaned,as-machined, or as-ground finish; dependent upon thickness .
Heat Treatment :Tungsten sheets are rolled and annealed to provide the optimum condition for the desired end use. 
Standard :ASTM B760-86 

Composition (PPM Max)

Element C O N Fe Ni Si
ppm 100 100 100 100 100 100


Tungsten Plate

Appearance:it has metallic silver luster. 
Density:min. 10.15g /㎤

Surface Condition:

Bright - Surface is chemically cleaned to remove all lubricants and oxides. 
Ground - Surface is ground to remove all coating and to achieve precise thickness control.

Standard:ASTM B760-86 

Composition(PPM Max)

Element C O N Fe Ni Si
ppm 100 100 100 100 100 100

Tungsten Rod



For producing electric light source parts and electric vaccum components; 

For producing heating elements and refractory parts in high temperature furnaces. 

Chemical Composition: 
W Content >99.95% 
Other Element Content Total <0.05% 
Each Element Content <0.01% 

Surface Condition:

Black - Surface is black,retaining a coating of processing lubricants and oxides. 
Bright - Surface is chemically cleaned to remove all lubricants and oxides. 
Ground - Surface is centerless ground to remove all coating and to achieve precise
diameter control 


The diameter is ranging from 0.5mm to 100mm. Special requests are available.

Tungsten Wire

Single wire of 15kg has no welding joint. 
It is regular black with smearing graphite surface. After removing graphite, it has metallic luster.

Density:19.25g /㎤. 

Coils wrapped with waterproof paper and plastic bag inner and with carton box outside.

Tungsten twisted wires(Stranded wires)
3 cores, 4 cores , 7cords, 7x19=133 cores and so on....
Bright surface with silver luster. 
Vaccum evaporation ,vacuum metallurgy application.
Vaccum coating on metal, plastic,ceramic , PVD
Glass grobbers and stirrers, for mirror making

Tungsten filament


Tungsten Filaments are used in vacuum evaporation .
We can provide 1-8 strand, V shaped, Double V shaped, coiled and special shaped Tungsten Filaments.

Chemical Composition: WAl , W1








Tungsten Alloy

Heavy Metals(WNiFe,WNiCu)

  Heavy Metal(WNiFe,WNiCu)is often used as both a weight and structural member. Corrosion proof.Density 17.0-18.5 g/cm3.
  Weights and counterbalances for aircraft control surfaces and rotor blades, guidance platforms, balancing of flywheels and crankshafts, vibration damping governors, and fuse masses and weights for self-winding watches are typical applications. Other specific applications include: Radiation Shielding,Rotating Inertia Members,Projectiles...

Tungsten Alloy containing various oxide additive

Application :

  apply to protecting arc welding with inert gases and plasma jointing ,cutting ,spraying and smelting.


  high melting point ,steady electric arc ,without self-consume .Tungsten increasing 0.15-4% Tho2,Zro2,Lao2,Ceo2,which can reduce the loss of tungsten pole , prolong its life ,not pollute the welding seam ,increase Launching ability of tungsten pole electrons and so on .Therefore ,the quality of welding seam is high.

Standards: ISO 6848 international standard and AWS5.12.
Surface condition: smooth ,clean ,no defect ,no greasy dirt and other impurity.

Tungsten Copper Composite Material

  As a high performance material,Tungsten-Copper is characterized by high thermal conductivity, low thermal expansion and high wear resistance combined with excellent electrical conductivity.


  High Voltage Arc Contacts, Vacuum Contacts, Electrodes for Resistant Welding and Spark Erosion.



E-mail : Tel : +886-4-2452-8920 Fax : +886-4-2705-9365 copyright 2013 © Wada Technology all right reversed